Automatic GSM Motor starter

Product Details:

Features And Protections:

• This has Voltage Sensing technology so the motor is protected up to Starter terminals.
• Phase failure / loss from the supply side.
• Phase reversal / wrong phase sequence from the supply side.
• Phase to phase voltage unbalance.
• Electronic overload ( site selectable).
• Remote sensing dry run / No load current ( site selectable).
• Extreme high current (EHC) or short circuit more than 24 amps.

Control Settings:

• Pump Current Setting is easy, accurate, auto setting type, with digital display.
• Pump current setting can be done through SMS, Mobile phone onsite.
• Overload is site selectable from 20 to 50 % of set current.
• Dry run setting from 75 to 95 %.
• Dry run bypass facility by SMS / PHONE.
• Site selectable Auto / Manual operation switch.

Monitoring:

• Calibrated Digital Voltmeter with ± 2V Accuracy. ( Data by SMS ).
• Calibrated Digital Ammeter ± 0.2Amp Accuracy. ( Data by SMS )
• Display Shows the all settable range and trips current value of set parameter online.
• Digital display for fault value at tripping. ( Data by SMS only).
• Inbuilt memory to show last setting value ( Data by SMS only )
• On-site Auto Fault Detect (AFT) for AC voltage, LEDS, Display, Relay, etc.

Timers:

• Site settable auto start timer for power failure (3-300 secs) and SPP faults from the supply side.
• Site settable star delta timer (3-30 secs.).
• Time delay to filter power on spikes and surges.

Additional Features:

• Suitable for DOL, Star-Delta Starters.
• 4 Digit Password protected operation.
• Talks verbal information in required language.
• Works on wide voltage supply (225 to 500 V).
• Facility to check network communication between GSM SIM and dialer phone.
• No call charges when power is absent.
• Auto call disconnect facility to save call charges.
• Motor ON and OFF switch on unit.
• Switch for Easy bypass and network checking.

Additional Information:

• Delivery Time: 1-2 dyas
• Packaging Details: By courier

Product Details:

The "INDUSMATE GSM WIRELESS MOTOR MANGEMENT" is intelligent and flexible motor management system. It offers comprehensive motor management including extensive protection, monitoring and control functions. With easy to use operation and on-site diagnostic data helps us to carry out predictive maintenance and GSM Technology based operations.

 

Technology

 

This has Dual core microcontroller and GSM SIM based technology which is unique, reliable, and cost effective and continues to monitors all parameter and applications simultaneously at all the time and there is no delay in any fault condition detection, monitoring and providing safety.

 

Mobile Phone and SIM Based Operations

 

This product is very unique as you can three modes to operate

1. Use switches given on the unit 

2. Dial the GSM SIM card inserted in the unit and use voice interactive service.

3. By sending SMS to unit to do /set all the parameters.

 

INDUSMATE GSM DISPLAY DISPLAY SIM uses activated SIM card from any GSM service provider which communicate with server or any mobile phone. For example system is installed and connected to motor than it continuously monitors/ protects every activity of motor at site and sends all data to the web server / website or any mobile phone by SMS on real time basis.

 

Protections

 

This has VOLTAGE SENSING technology so motor is protected up to STARTER terminals.

 

Phase failure / loss from supply side.

        Phase reversal / wrong phase sequence from supply side.

Phase to phase voltage unbalance.

Electronic overload ( site selectable).

Remote sensing dry run / No load current ( site selectable).

Extreme high current (EHC) or short circuit more than 24 amps.

Additional Information:

• Delivery Time: 1-2 days
• Packaging Details: By Courier

Product Details:

We are offering Fully Automatic GSM Wireless Mobile Starter to our most reliable customers located all-round the nation. Widely acknowledged by our customers for superior performance and longer service life, the offered product is stringently tested on industry defined parameters by our quality controllers in adherence to set international industry standards.

Features:

• Superior functioning
• Easy to install and operate
• Rigid design
• Sturdiness

Features and Protections:

• This has Voltage Sensing technology so the motor is protected up to Stater terminals.
• Phase failure / loss from the supply side.
• Phase reversal / wrong phase sequence from the supply side.
• Phase to phase voltage unbalance.
• Electronic overload ( site selectable).
• Remote sensing dry run / No load current ( site selectable).
• Extreme high current (EHC) or short circuit more than 24 amps.

Control Settings:

• PUMP Current Setting is easy, accurate, auto setting type, with digital display.
• Pump current setting can be done through SMS, Mobile phone & on site.
• Overload is site selectable from 20 to 50 % of set current.
• Dry run setting from 75 to 95 %.
• Dry run bypass facility by SMS / PHONE.
• Site selectable Auto / Manual operation switch

Monitoring:

• Calibrated Digital Voltmeter with ± 2V Accuracy. ( Data by SMS ).
• Calibrated Digital Ammeter ± 0.2Amp Accuracy. ( Data by SMS )
• Display Shows the all settable range and trips current value of set parameter online.
• Digital display for fault value at tripping. ( Data by SMS only).
• Inbuilt memory to show last setting value ( Data by SMS only ).
• On-site Auto Fault Detect (AFT) for AC voltage, LEDS, Display, Relay, etc.

Timers:

• Site settable auto start timer for power failure (3-300 secs) and SPP faults from the supply side.
• Site settable star delta timer (3-30 secs.).
• Time delay to filter power on spikes and surges.

Additional Features:

• Suitable for DOL, Star-Delta Starters.
• 4 Digit Password protected the operation.
• Talks verbal information in required language.
• Works on wide voltage supply (225 to 500 V).
• Facility to check network communication between GSM SIM and dialer phone.
• No call charges when power is absent.
• Auto calls disconnect facility to save call charges.
• Motor ON and OFF switch on the unit.
• Switch for Easy bypass and network checking.
• Manual, Automatic and Semi automatic type
• Three phsae

Additional Information:

• Delivery Time: 1 DAY
• Packaging Details: by Courier

Product Details:

The "INDUSMATE GSM WIRELESS MOTOR MANGEMENT" is intelligent and flexible motor management system. It offers comprehensive motor management including extensive protection, monitoring and control functions. With easy to use operation and on-site diagnostic data helps us to carry out predictive maintenance and GSM Technology based operations.
Technology
This has Dual core microcontroller and GSM SIM based technology which is unique, reliable, and cost effective and continues to monitors all parameter and applications simultaneously at all the time and there is no delay in any fault condition detection, monitoring and providing safety.
Mobile Phone and SIM Based Operations
This product is very unique as you can three modes to operate1. Use switches given on the unit 2. Dial the GSM SIM card inserted in the unit and use voice interactive service.3. By sending SMS to unit to do /set all the parameters.
INDUSMATE GSM DISPLAY DISPLAY SIM uses activated SIM card from any GSM service provider which communicate with server or any mobile phone. For example system is installed and connected to motor than it continuously monitors/ protects every activity of motor at site and sends all data to the web server / website or any mobile phone by SMS on real time basis.
Protections
This has VOLTAGE SENSING technology so motor is protected up to STARTER terminals.
Phase failure / loss from supply side. Phase reversal / wrong phase sequence from supply side. Phase to phase voltage unbalance. Electronic overload ( site selectable). Remote sensing dry run / No load current ( site selectable). Extreme high current (EHC) or short circuit more than 24 amps.
Control Settings
PUMP CURRENT SETTING is easy, accurate, auto setting type, with digital display.Pump current setting can be done through SMS, Mobile phone & onsite.Overload is site selectable from 20 to 50 % of set current.Dry run setting from 75 to 95 %.Dry run bypass facility by SMS / PHONE.Site selectable Auto / Manual operation switch.
Monitoring
Calibrated Digital Voltmeter with ± 2V Accuracy. ( Data by SMS ).Calibrated Digital Ammeter ± 0.2Amp Accuracy. ( Data by SMS )Display Shows the all settable range and trip current value of set parameter online.Digital display for fault value at tripping. ( Data by SMS only).Inbuilt memory to show last setting value ( Data by SMS only )On site AUTO FAULT DETECT (AFT) for AC voltage, LEDS, Display, Relay, etc.

Timers
Site settable auto start timer for power failure (3-300 secs) and SPP faults from supply side.Site settable star delta timer (3-30 secs.).Time delay to filter power on spikes and surges.
Additional Features
Suitable for DOL, Star-Delta Starters.4 Digit Password protected operation.Talks verbal information in required language.Works on wide voltage supply (225 to 500 V).Facility to check network communication between GSM SIM and dialer phone.No call charges when power is absent.Auto call disconnect facility to save call charges.Motor ON and OFF switch on unit.Switch for Easy bypass and network checking.

Additional Information:

• Delivery Time: 1 DAY

Product Details:

Features And Protections:

• This has Voltage Sensing technology so the motor is protected up to Starter terminals.
• Phase failure / loss from the supply side.
• Phase reversal / wrong phase sequence from the supply side.
• Phase to phase voltage unbalance.
• Electronic overload ( site selectable).
• Remote sensing dry run / No load current ( site selectable).
• Extreme high current (EHC) or short circuit more than 24 amps.

Control Settings:

• Pump Current Setting is easy, accurate, auto setting type, with digital display.
• Pump current setting can be done through SMS, Mobile phone onsite.
• Overload is site selectable from 20 to 50 % of set current.
• Dry run setting from 75 to 95 %.
• Dry run bypass facility by SMS / PHONE.
• Site selectable Auto / Manual operation switch.

Monitoring:

• Calibrated Digital Voltmeter with ± 2V Accuracy. ( Data by SMS ).
• Calibrated Digital Ammeter ± 0.2Amp Accuracy. ( Data by SMS )
• Display Shows the all settable range and trips current value of set parameter online.
• Digital display for fault value at tripping. ( Data by SMS only).
• Inbuilt memory to show last setting value ( Data by SMS only )
• On-site Auto Fault Detect (AFT) for AC voltage, LEDS, Display, Relay, etc.

Timers:

• Site settable auto start timer for power failure (3-300 secs) and SPP faults from the supply side.
• Site settable star delta timer (3-30 secs.).
• Time delay to filter power on spikes and surges.

Additional Features:

• Suitable for DOL, Star-Delta Starters.
• 4 Digit Password protected operation.
• Talks verbal information in required language.
• Works on wide voltage supply (225 to 500 V).
• Facility to check network communication between GSM SIM and dialer phone.
• No call charges when power is absent.
• Auto call disconnect facility to save call charges.
• Motor ON and OFF switch on unit.
• Switch for Easy bypass and network checking.

Product Details:

The "INDUSMATE GSM WIRELESS MOTOR MANGEMENT" is intelligent and flexible motor management system. It offers comprehensive motor management including extensive protection, monitoring and control functions. With easy to use operation and on-site diagnostic data helps us to carry out predictive maintenance and GSM Technology based operations.
Technology
This has Dual core microcontroller and GSM SIM based technology which is unique, reliable, and cost effective and continues to monitors all parameter and applications simultaneously at all the time and there is no delay in any fault condition detection, monitoring and providing safety.
Mobile Phone and SIM Based Operations
This product is very unique as you can three modes to operate1. Use switches given on the unit 2. Dial the GSM SIM card inserted in the unit and use voice interactive service.3. By sending SMS to unit to do /set all the parameters.
INDUSMATE GSM DISPLAY DISPLAY SIM uses activated SIM card from any GSM service provider which communicate with server or any mobile phone. For example system is installed and connected to motor than it continuously monitors/ protects every activity of motor at site and sends all data to the web server / website or any mobile phone by SMS on real time basis.
Protections
This has VOLTAGE SENSING technology so motor is protected up to STARTER terminals.
Phase failure / loss from supply side. Phase reversal / wrong phase sequence from supply side. Phase to phase voltage unbalance. Electronic overload ( site selectable). Remote sensing dry run / No load current ( site selectable). Extreme high current (EHC) or short circuit more than 24 amps.
Control Settings
PUMP CURRENT SETTING is easy, accurate, auto setting type, with digital display.Pump current setting can be done through SMS, Mobile phone & onsite.Overload is site selectable from 20 to 50 % of set current.Dry run setting from 75 to 95 %.Dry run bypass facility by SMS / PHONE.Site selectable Auto / Manual operation switch.
Monitoring
Calibrated Digital Voltmeter with ± 2V Accuracy. ( Data by SMS ).Calibrated Digital Ammeter ± 0.2Amp Accuracy. ( Data by SMS )Display Shows the all settable range and trip current value of set parameter online.Digital display for fault value at tripping. ( Data by SMS only).Inbuilt memory to show last setting value ( Data by SMS only )On site AUTO FAULT DETECT (AFT) for AC voltage, LEDS, Display, Relay, etc.

Timers
Site settable auto start timer for power failure (3-300 secs) and SPP faults from supply side.Site settable star delta timer (3-30 secs.).Time delay to filter power on spikes and surges.
Additional Features
Suitable for DOL, Star-Delta Starters.4 Digit Password protected operation.Talks verbal information in required language.Works on wide voltage supply (225 to 500 V).Facility to check network communication between GSM SIM and dialer phone.No call charges when power is absent.Auto call disconnect facility to save call charges.Motor ON and OFF switch on unit.Switch for Easy bypass and network checking.

Additional Information:

• Delivery Time: 1 DAY

Product Details:

The "INDUSMATE GSM WIRELESS MOTOR MANGEMENT" is intelligent and flexible motor management system. It offers comprehensive motor management including extensive protection, monitoring and control functions. With easy to use operation and on-site diagnostic data helps us to carry out predictive maintenance and GSM Technology based operations.

 

Technology

 

This has Dual core microcontroller and GSM SIM based technology which is unique, reliable, and cost effective and continues to monitors all parameter and applications simultaneously at all the time and there is no delay in any fault condition detection, monitoring and providing safety.

 

Mobile Phone and SIM Based Operations

 

This product is very unique as you can three modes to operate

1. Use switches given on the unit

2. Dial the GSM SIM card inserted in the unit and use voice interactive service.

3. By sending SMS to unit to do /set all the parameters.

 

INDUSMATE GSM DISPLAY DISPLAY SIM uses activated SIM card from any GSM service provider which communicate with server or any mobile phone. For example system is installed and connected to motor than it continuously monitors/ protects every activity of motor at site and sends all data to the web server / website or any mobile phone by SMS on real time basis.

 

Protections

 

This has VOLTAGE SENSING technology so motor is protected up to STARTER terminals.

 

Phase failure / loss from supply side.

Phase reversal / wrong phase sequence from supply side.

Phase to phase voltage unbalance.

Electronic overload ( site selectable).

Remote sensing dry run / No load current ( site selectable).

Extreme high current (EHC) or short circuit more than 24 amps.

 

Control Settings

 

PUMP CURRENT SETTING is easy, accurate, auto setting type, with digital display.

Pump current setting can be done through SMS, Mobile phone & onsite.

Overload is site selectable from 20 to 50 % of set current.

Dry run setting from 75 to 95 %.

Dry run bypass facility by SMS / PHONE.Site selectable Auto / Manual operation switch.

 

 

Additional Information:

• Delivery Time: 1 DAY

Product Details:

The "INDUSMATE GSM WIRELESS MOTOR MANGEMENT" is intelligent and flexible motor management system. It offers comprehensive motor management including extensive protection, monitoring and control functions. With easy to use operation and on-site diagnostic data helps us to carry out predictive maintenance and GSM Technology based operations.

 

Technology

 

This has Dual core microcontroller and GSM SIM based technology which is unique, reliable, and cost effective and continues to monitors all parameter and applications simultaneously at all the time and there is no delay in any fault condition detection, monitoring and providing safety.

 

Mobile Phone and SIM Based Operations

 

This product is very unique as you can three modes to operate

1. Use switches given on the unit

2. Dial the GSM SIM card inserted in the unit and use voice interactive service.

3. By sending SMS to unit to do /set all the parameters.

 

INDUSMATE GSM DISPLAY DISPLAY SIM uses activated SIM card from any GSM service provider which communicate with server or any mobile phone. For example system is installed and connected to motor than it continuously monitors/ protects every activity of motor at site and sends all data to the web server / website or any mobile phone by SMS on real time basis.

Additional Information:

• Delivery Time: 1 DAY
• Packaging Details: By Courier

Product Details:

Features And Protections:

• This has Voltage Sensing technology so the motor is protected up to Starter terminals.
• Phase failure / loss from the supply side.
• Phase reversal / wrong phase sequence from the supply side.
• Phase to phase voltage unbalance.
• Electronic overload ( site selectable).
• Remote sensing dry run / No load current ( site selectable).
• Extreme high current (EHC) or short circuit more than 24 amps.

Control Settings:

• Pump Current Setting is easy, accurate, auto setting type, with digital display.
• Pump current setting can be done through SMS, Mobile phone & onsite.
• Overload is site selectable from 20 to 50 % of set current.
• Dry run setting from 75 to 95 %.
• Dry run bypass facility by SMS / PHONE.
• Site selectable Auto / Manual operation switch.

Monitoring:

• Calibrated Digital Voltmeter with ± 2V Accuracy. ( Data by SMS ).
• Calibrated Digital Ammeter ± 0.2Amp Accuracy. ( Data by SMS )
• Display Shows the all settable range and trips current value of set parameter online.
• Digital display for fault value at tripping. ( Data by SMS only).
• Inbuilt memory to show last setting value ( Data by SMS only )
• On-site Auto Fault Detect (AFT) for AC voltage, LEDS, Display, Relay, etc.

Timers:

• Site settable auto start timer for power failure (3-300 secs) and SPP faults from the supply side.
• Site settable star delta timer (3-30 secs.).
• Time delay to filter power on spikes and surges.

Additional Features:

• Suitable for DOL, Star-Delta Starters.
• 4 Digit Password protected operation.
• Talks verbal information in required language.
• Works on wide voltage supply (225 to 500 V).
• Facility to check network communication between GSM SIM and dialer phone.
• No call charges when power is absent.
• Auto call disconnect facility to save call charges.
• Motor ON and OFF switch on unit.
• Switch for Easy bypass and network checking.

Additional Information:

• Delivery Time: 1-2 days
• Packaging Details: By Courier

Product Details:

The "INDUSMATE GSM WIRELESS MOTOR MANGEMENT" is intelligent and flexible motor management system. It offers comprehensive motor management including extensive protection, monitoring and control functions. With easy to use operation and on-site diagnostic data helps us to carry out predictive maintenance and GSM Technology based operations.
Technology
This has Dual core microcontroller and GSM SIM based technology which is unique, reliable, and cost effective and continues to monitors all parameter and applications simultaneously at all the time and there is no delay in any fault condition detection, monitoring and providing safety.
Mobile Phone and SIM Based Operations
This product is very unique as you can three modes to operate1. Use switches given on the unit 2. Dial the GSM SIM card inserted in the unit and use voice interactive service.3. By sending SMS to unit to do /set all the parameters.
INDUSMATE GSM DISPLAY DISPLAY SIM uses activated SIM card from any GSM service provider which communicate with server or any mobile phone. For example system is installed and connected to motor than it continuously monitors/ protects every activity of motor at site and sends all data to the web server / website or any mobile phone by SMS on real time basis.
Protections
This has VOLTAGE SENSING technology so motor is protected up to STARTER terminals.
Phase failure / loss from supply side. Phase reversal / wrong phase sequence from supply side. Phase to phase voltage unbalance. Electronic overload ( site selectable). Remote sensing dry run / No load current ( site selectable). Extreme high current (EHC) or short circuit more than 24 amps.
Control Settings
PUMP CURRENT SETTING is easy, accurate, auto setting type, with digital display.Pump current setting can be done through SMS, Mobile phone & onsite.Overload is site selectable from 20 to 50 % of set current.Dry run setting from 75 to 95 %.Dry run bypass facility by SMS / PHONE.Site selectable Auto / Manual operation switch.
Monitoring
Calibrated Digital Voltmeter with ± 2V Accuracy. ( Data by SMS ).Calibrated Digital Ammeter ± 0.2Amp Accuracy. ( Data by SMS )Display Shows the all settable range and trip current value of set parameter online.Digital display for fault value at tripping. ( Data by SMS only).Inbuilt memory to show last setting value ( Data by SMS only )On site AUTO FAULT DETECT (AFT) for AC voltage, LEDS, Display, Relay, etc.

Timers
Site settable auto start timer for power failure (3-300 secs) and SPP faults from supply side.Site settable star delta timer (3-30 secs.).Time delay to filter power on spikes and surges.
Additional Features
Suitable for DOL, Star-Delta Starters.4 Digit Password protected operation.Talks verbal information in required language.Works on wide voltage supply (225 to 500 V).Facility to check network communication between GSM SIM and dialer phone.No call charges when power is absent.Auto call disconnect facility to save call charges.Motor ON and OFF switch on unit.Switch for Easy bypass and network checking.

Additional Information:

• Item Code: KHYATEE
• Delivery Time: 1 DAY
• Packaging Details: by Courier

Product Details:

The "INDUSMATE GSM WIRELESS MOTOR MANGEMENT" is intelligent and flexible motor management system. It offers comprehensive motor management including extensive protection, monitoring and control functions. With easy to use operation and on-site diagnostic data helps us to carry out predictive maintenance and GSM Technology based operations.

 

Technology

 

This has Dual core microcontroller and GSM SIM based technology which is unique, reliable, and cost effective and continues to monitors all parameter and applications simultaneously at all the time and there is no delay in any fault condition detection, monitoring and providing safety.

 

Mobile Phone and SIM Based Operations

 

This product is very unique as you can three modes to operate

1. Use switches given on the unit 

2. Dial the GSM SIM card inserted in the unit and use voice interactive service.

3. By sending SMS to unit to do /set all the parameters.

 

INDUSMATE GSM DISPLAY DISPLAY SIM uses activated SIM card from any GSM service provider which communicate with server or any mobile phone. For example system is installed and connected to motor than it continuously monitors/ protects every activity of motor at site and sends all data to the web server / website or any mobile phone by SMS on real time basis.

 

Protections

 

This has VOLTAGE SENSING technology so motor is protected up to STARTER terminals.

 

Phase failure / loss from supply side.

        Phase reversal / wrong phase sequence from supply side.

Phase to phase voltage unbalance.

Electronic overload ( site selectable).

Remote sensing dry run / No load current ( site selectable).

Extreme high current (EHC) or short circuit more than 24 amps.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: AHMEDABAD
• Production Capacity: 1000
• Delivery Time: 2 days
• Packaging Details: CORUGATED BOX PACKING

Air conditioner Fully Automatic GSM Mobile AC Starter with load indication.

Features:

• On/Off
• Off Timer
• Load Indication.

Additional Information:

• Delivery Time: 1 DAY

Product Details:

The "INDUSMATE GSM WIRELESS MOTOR MANGEMENT" is intelligent and flexible motor management system. It offers comprehensive motor management including extensive protection, monitoring and control functions. With easy to use operation and on-site diagnostic data helps us to carry out predictive maintenance and GSM Technology based operations. Technology: This has Dual core microcontroller and GSM SIM based technology which is unique, reliable, and cost effective and continues to monitors all parameter and applications simultaneously at all the time and there is no delay in any fault condition detection, monitoring and providing safety. Mobile Phone and SIM Based Operatio
• This product is very unique as you can three modes to operate
• Use switches given on the unit
• Dial the GSM SIM card inserted in the unit and use voice interactive service.
• By sending SMS to unit to do /set all the parameters. INDUSMATE GSM DISPLAY DISPLAY SIM uses activated SIM card from any GSM service provider which communicate with server or any mobile phone. For example system is installed and connected to motor than it continuously monitors/ protects every activity of motor at site and sends all data to the web server / website or any mobile phone by SMS on real time basis. Protections:
• This has VOLTAGE SENSING technology so motor is protected up to STARTER terminals.
• Phase failure / loss from supply side.
• Phase reversal / wrong phase sequence from supply side.
• Phase to phase voltage unbalance.
• Electronic overload ( site selectable).
• Remote sensing dry run / No load current ( site selectable).
• Extreme high current (EHC) or short circuit more than 24 amps.
• Control Settings
• PUMP CURRENT SETTING is easy, accurate, auto setting type, with digital display.
• Pump current setting can be done through SMS, Mobile phone & onsite.
• Overload is site selectable from 20 to 50 % of set current.
• Dry run setting from 75 to 95 %.
• Dry run bypass facility by SMS / PHONE.Site selectable Auto / Manual operation switch. Additional Features:
• Suitable for DOL, Star-Delta Starters.
• 4 Digit Password protected operation.
• Talks verbal information in required language.
• Works on wide voltage supply (225 to 500 V).
• Facility to check network communication between GSM SIM and dialer phone.
• No call charges when power is absent.
• Auto call disconnect facility to save call charges.
• Motor ON and OFF switch on unit.
• Switch for Easy bypass and network checking.
ns

Additional Information:

• Delivery Time: 1 DAY
• Packaging Details: By courier

Product Details:

Features And Protections:

• This has Voltage Sensing technology so the motor is protected up to Starter terminals.
• Phase failure / loss from the supply side.
• Phase reversal / wrong phase sequence from the supply side.
• Phase to phase voltage unbalance.
• Electronic overload ( site selectable).
• Remote sensing dry run / No load current ( site selectable).
• Extreme high current (EHC) or short circuit more than 24 amps.

Control Settings:

• Pump Current Setting is easy, accurate, auto setting type, with digital display.
• Pump current setting can be done through SMS, Mobile phone onsite.
• Overload is site selectable from 20 to 50 % of set current.
• Dry run setting from 75 to 95 %.
• Dry run bypass facility by SMS / PHONE.
• Site selectable Auto / Manual operation switch.

Monitoring:

• Calibrated Digital Voltmeter with ± 2V Accuracy. ( Data by SMS ).
• Calibrated Digital Ammeter ± 0.2Amp Accuracy. ( Data by SMS )
• Display Shows the all settable range and trips current value of set parameter online.
• Digital display for fault value at tripping. ( Data by SMS only).
• Inbuilt memory to show last setting value ( Data by SMS only )
• On-site Auto Fault Detect (AFT) for AC voltage, LEDS, Display, Relay, etc.

Timers:

• Site settable auto start timer for power failure (3-300 secs) and SPP faults from the supply side.
• Site settable star delta timer (3-30 secs.).
• Time delay to filter power on spikes and surges.

Additional Features:

• Suitable for DOL, Star-Delta Starters.
• 4 Digit Password protected operation.
• Talks verbal information in required language.
• Works on wide voltage supply (225 to 500 V).
• Facility to check network communication between GSM SIM and dialer phone.
• No call charges when power is absent.
• Auto call disconnect facility to save call charges.
• Motor ON and OFF switch on unit.
• Switch for Easy bypass and network checking.

Product Details:

The "INDUSMATE GSM WIRELESS MOTOR MANGEMENT" is intelligent and flexible motor management system. It offers comprehensive motor management including extensive protection, monitoring and control functions. With easy to use operation and on-site diagnostic data helps us to carry out predictive maintenance and GSM Technology based operations.

 

Technology

 

This has Dual core microcontroller and GSM SIM based technology which is unique, reliable, and cost effective and continues to monitors all parameter and applications simultaneously at all the time and there is no delay in any fault condition detection, monitoring and providing safety.

 

Mobile Phone and SIM Based Operations

 

This product is very unique as you can three modes to operate

1. Use switches given on the unit

2. Dial the GSM SIM card inserted in the unit and use voice interactive service.

3. By sending SMS to unit to do /set all the parameters.

 

INDUSMATE GSM DISPLAY DISPLAY SIM uses activated SIM card from any GSM service provider which communicate with server or any mobile phone. For example system is installed and connected to motor than it continuously monitors/ protects every activity of motor at site and sends all data to the web server / website or any mobile phone by SMS on real time basis.

 

Protections

 

This has VOLTAGE SENSING technology so motor is protected up to STARTER terminals.

 

Phase failure / loss from supply side.

Phase reversal / wrong phase sequence from supply side.

Phase to phase voltage unbalance.

Electronic overload ( site selectable).

Remote sensing dry run / No load current ( site selectable).

Extreme high current (EHC) or short circuit more than 24 amps.

 

Control Settings

 

PUMP CURRENT SETTING is easy, accurate, auto setting type, with digital display.

Pump current setting can be done through SMS, Mobile phone & onsite.

Overload is site selectable from 20 to 50 % of set current.

Dry run setting from 75 to 95 %.

Dry run bypass facility by SMS / PHONE.Site selectable Auto / Manual operation switch.

Additional Features

 

Suitable for DOL, Star-Delta Starters.

4 Digit Password protected operation.

Talks verbal information in required language.

Works on wide voltage supply (225 to 500 V).

Facility to check network communication between GSM SIM and dialer phone.

No call charges when power is absent.

Auto call disconnect facility to save call charges.

Motor ON and OFF switch on unit.

Switch for Easy bypass and network checking.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1 DAY
• Packaging Details: By courier

Product Details:

Features and Protections:

• Electrical shock as per IS 12650 ( Earth Leakage )
• High voltage with auto start
• The extremely high voltage at 300 volts even in bypass mode.
• Low voltage with auto start.
• Power on spikes and surges.
• Electronic Extreme high current (EHC) / Overload at 26 amps.
• Thermal overload as per IS 8878.
• Short circuit protection as per IS 8878.
• 32 amps MCB to act as the main switch for house and protection short circuit.
• Technology Microcontroller based digital product with high reliability and long life.

World class MCU and software which is highly faulted tolerant to noise and Electromagnetic interferences.

Control Settings:

• Site selectable high voltage setting from 260 to 285 volts for site condition.
• Site selectable bypass facility for all protections.
• Site selectable bypass facility for earth leakage .
• Site selectable automatic function by a switch.
• Monitoring Calibrated Digital Voltmeter with 100 to 300 volt ± 2 volts. Accuracy.
• Digital display for fault ampere / voltage at tripping.
• Inbuilt memory to show last setting value.
• On-site Auto Fault Detect (AFT) for AC voltage, LEDS, Display, Relay, etc.
• Timers Time delay to filter power on spikes and surges.
• Additional Features Unit capacity is 25 amps ( higher amperage on request ).
• Totally eliminates the need for voltage stabilizers in the house.
• The unit is tested by government approved agency like ETDC, Govt.of India.
• Widest working voltage ranges from 140 to 300 volts.
• The unit also protects from leakages in wiring and appliances so prevents wastage of electricity so indirectly may save electricity bills.

We can also find out faulty appliances and wires where there are current leakage and wastage. Color coded Teflon wiring with lugs for longer life. Modular design very easy to install and site servicing.

Technical Features:

• Electrical shock as per IS 12650 ( Earth Leakage )
• High voltage with auto start
• Extreme high voltage at 300 volts even in bypass mode.
• Low voltage with auto start.
• Power on spikes and surges.
• Electronic Extreme high current (EHC) / Overload at 26 amps.
• Thermal overload as per IS 8878.
• Short circuit protection as per IS 8878.
• 32 amps MCB to act as main switch for house and protection short circuit.
• Technology Microcontroller based digital product with high reliability and long life.
• World class MCU and software which is highly fault tolerant to noise and Electro magnetic interferences.
• Site selectable high voltage setting from 260 to 285 volts for site condition.
• Site selectable bypass facility for all protections.
• Site selectable bypass facility for earth leakage .
• Site selectable automatic function by switch.
• Monitoring Calibrated Digital Voltmeter with 100 to 300 volt ± 2 volt. Accuracy.
• Digital display for fault ampere / voltage at tripping.
• In built memory to show last setting value.
• On site Auto Fault Detect(AFT) for AC voltage, LEDs, Display, Relay, etc.
• Timers Time delay to filter power on spikes and surges.
• Additional Features Unit capacity is 25 amps ( higher amperage on request ).
• Totally eliminates the need for voltage stabilizers in the house.
• Unit is tested by government approved agency like ETDC, Govt.of India.
• Widest working voltage range from 140 to 300 volts.
• Unit also protects form leakages in wiring and appliances so prevents wastage of electricity so indirectly may save electricity bills.

We can also find out faulty appliances and wires where there is current leakage and wastage. Color coded Teflon wiring with lugs for longer life. Modular design very easy to install and site servicing.

Price Range: 1500 - 5000

Features:

• Microcontroller based software Technology
• 30 models in single / three phase range
• Calibrated Digital Voltmeter & Ammeter
• Electrical safety from all electrical faults

Functions:

• Microcontroller based software Technology
• 30 models in single / three phase range
• Calibrated Digital Voltmeter & Ammeter
• Electrical safety from all electrical faults

Price Range 1500 To 50000 Rs

Product Details:

The "INDUSMATE GSM WIRELESS MOTOR MANGEMENT" is intelligent and flexible motor management system. It offers comprehensive motor management including extensive protection, monitoring and control functions. With easy to use operation and on-site diagnostic data helps us to carry out predictive maintenance and GSM Technology based operations.
Technology
This has Dual core microcontroller and GSM SIM based technology which is unique, reliable, and cost effective and continues to monitors all parameter and applications simultaneously at all the time and there is no delay in any fault condition detection, monitoring and providing safety.
Mobile Phone and SIM Based Operations
This product is very unique as you can three modes to operate1. Use switches given on the unit 2. Dial the GSM SIM card inserted in the unit and use voice interactive service.3. By sending SMS to unit to do /set all the parameters.
INDUSMATE GSM DISPLAY DISPLAY SIM uses activated SIM card from any GSM service provider which communicate with server or any mobile phone. For example system is installed and connected to motor than it continuously monitors/ protects every activity of motor at site and sends all data to the web server / website or any mobile phone by SMS on real time basis.
Protections
This has VOLTAGE SENSING technology so motor is protected up to STARTER terminals.
Phase failure / loss from supply side. Phase reversal / wrong phase sequence from supply side. Phase to phase voltage unbalance. Electronic overload ( site selectable). Remote sensing dry run / No load current ( site selectable). Extreme high current (EHC) or short circuit more than 24 amps.
Control Settings
PUMP CURRENT SETTING is easy, accurate, auto setting type, with digital display.Pump current setting can be done through SMS, Mobile phone & onsite.Overload is site selectable from 20 to 50 % of set current.Dry run setting from 75 to 95 %.Dry run bypass facility by SMS / PHONE.Site selectable Auto / Manual operation switch.
Monitoring
Calibrated Digital Voltmeter with ± 2V Accuracy. ( Data by SMS ).Calibrated Digital Ammeter ± 0.2Amp Accuracy. ( Data by SMS )Display Shows the all settable range and trip current value of set parameter online.Digital display for fault value at tripping. ( Data by SMS only).Inbuilt memory to show last setting value ( Data by SMS only )On site AUTO FAULT DETECT (AFT) for AC voltage, LEDS, Display, Relay, etc.
Timers
Site settable auto start timer for power failure (3-300 secs) and SPP faults from supply side.Site settable star delta timer (3-30 secs.).Time delay to filter power on spikes and surges.
Additional Features
Suitable for DOL, Star-Delta Starters.4 Digit Password protected operation.Talks verbal information in required language.Works on wide voltage supply (225 to 500 V).Facility to check network communication between GSM SIM and dialer phone.No call charges when power is absent.Auto call disconnect facility to save call charges.Motor ON and OFF switch on unit.Switch for Easy bypass and network checking.

Additional Information:

• Delivery Time: 1-2 days
• Packaging Details: by courier

By offering superior-quality Energy Management Wireless Monitoring System, our firm has gained immense appreciation from our clients. Keeping client satisfaction in our mind, we use only quality assured components to develop the monitoring system. We make this available to our clients in quality packaging material at market leading prices. 

Features:

• Hassle free performance
• Highly reliable
• Easy to install
• Application specific design

Monitor All Meter Remotely:

• Daily, weekly, monthly, yearly, Quarterly, Half yearly reports generation facility.
• Numeric and graphical data reports.

Khyatee 6000 SQ feet manufacturing set up which is certified to international quality standards ISO 9001-2000 by RWTUV Germany. certified to international quality standards ISO 9001-2000 by RWTUV.

Technical Features:

• Microcontroller based software Technology
• 30 models in single / three phase range
• Calibrated Digital Voltmeter & Ammeter
• Electrical safety from all electrical faults

Functions:

• Microcontroller based software Technology
• 30 models in single / three phase range
• Calibrated Digital Voltmeter & Ammeter
• Electrical safety from all electrical faults

We are dealing in Mobile starter

Additional Information:

• Minimum Order Quantity: 10 Piece